NB! B-Vare. Ta kontakt for informasjon
The Pixel Triton is our new high power LED pixel driver, which outputs up to 300W. Perfect for those large-scale touring projects, the Pixel Triton also supports up to 8 Universes of DMX data.
With 2,048 DMX channels per output, you get a total of 4,096 DMX channel at your disposal from the Pixel Triton, allowing you to drive up to 1,360 individual RGB pixels. Still not enough? Then daisy chain your Tritons with RJ45 Ethernet connectors to extend your set-up.
The Pixel Triton comes in two voltage options – 12V (outputting 260W) or 24V (the full 300W). Due to the smart design, your refresh rate won’t suffer if you’re using the Triton at its limits.
With compact dimensions of 335mm (L) 129mm (W) 43mm (H) and a weight of 2.4kg, this device will fit snugly into an ENTTEC 8-way rack unit (SKU:73530) for mounting into any standard touring case. this high power LED pixel driver is ready to go whenever you are!
Power Monitoring
By using the simple web interface, you’ll be able to monitor your power consumption in real time. You’ll get a warning when you’re at 80% power consumption, meaning you are always in control!
Connections
The Pixel Triton has 2 x 3-pin pixel outputs, 2 x EtherCON connectors (input/output) and 1 x IEC power connector.
Protocols
The Pixel Triton supports ArtNet 1/2/3 and sACN protocols.
Webpage configuration
The high power LED pixel driver comes with an intuitive web-based configuration. You can use your preferred browser, and you’ll be able to monitor your set-up in no time.
Supports a wide range of tape and dots
The following protocols are fully compatible with the Pixel Triton:
WS2811, WS2812, WS2812B, WS2813, SK6812, TM1804, TM1812, APA-104, 9PDOT (8 and 16-bit)