Produkter

Totalt antall treff:

Se hele resultatet...

Kategorier

Merker

Merkenavn

Artikler

Antall artikler funnet:

Briteq DMS-285 RDM Merge/Splitt/Boost2 in / 8 out, 5pin XLR,

9 628,-

This DMX merger + splitter + Booster with RDM support is the perfect all-in-one solution to secure your DMX-installations: 100% electrical isolation between all in-/outputs!
2 DMX-inputs + 8 DMX-outputs, each equipped with 5pin XLR-connectors.
Different port modes to combine 2 DMX signals (on inputs A and B) in different ways:
- HTP : the highest value of 2 identical channels from 2 DMX-signals has priority.
- LTP : the last changed value of 2 identical channels from 2 DMX-signals has priority.
- Backup : when the DMX-signal on input A fails, the DMX-signal on input B takes over immediately.
- A: 1-4 / B: 5-8 : DMX-signal on input A assigned to outputs 1 to 4, input B assigned to outputs 5-8.
The splitter function distributes the DMX-signal(s) from the A/B input(s) over 8 identical outputs.
Full electric isolation : all inputs and outputs are 100% isolated from each other: problems that occur on any in/output will not influence the other in/outputs!
RDM filtering : RDM on both inputs can be filtered to prevent unexpected behavior of DMX equipment.
The timing of the DMX-outputs can be adapted from 20Hz (slow) to 40Hz (fast) for increased compatibility while connecting “slow” DMX-devices to “fast” DMX-controllers.
Output behavior can be selected when suddenly both DMX-inputs fail:
- No DMX : no DMX signal on the outputs.
- HOLD : keep the last DMX values on the outputs.
- ZERO : set the DMX values on all outputs to zero.
Easy setup via graphic OLED display.

Briteq DMS-285 RDM Merge/Splitt/Boost 2 in / 8 out, 5pin XLR,

Tilbehør

TRANSCENSION PowerCon splitter 19"

Alternativer

Artikler

Antall artikler funnet:

Briteq DMS-285 RDM Merge/Splitt/Boost

2 in / 8 out, 5pin XLR,

Varenr: 183649

Alt. varenr: DMS-285 RDM

9 628,-eks. mva

Logg inn for å se dine nettopriser.
Ikke kunde? Søk om å bli kunde her.

Ikke på lager i Oslo. Ta kontakt for leveringstid.

Beskrivelse

This DMX merger + splitter + Booster with RDM support is the perfect all-in-one solution to secure your DMX-installations: 100% electrical isolation between all in-/outputs!
2 DMX-inputs + 8 DMX-outputs, each equipped with 5pin XLR-connectors.
Different port modes to combine 2 DMX signals (on inputs A and B) in different ways:
- HTP : the highest value of 2 identical channels from 2 DMX-signals has priority.
- LTP : the last changed value of 2 identical channels from 2 DMX-signals has priority.
- Backup : when the DMX-signal on input A fails, the DMX-signal on input B takes over immediately.
- A: 1-4 / B: 5-8 : DMX-signal on input A assigned to outputs 1 to 4, input B assigned to outputs 5-8.
The splitter function distributes the DMX-signal(s) from the A/B input(s) over 8 identical outputs.
Full electric isolation : all inputs and outputs are 100% isolated from each other: problems that occur on any in/output will not influence the other in/outputs!
RDM filtering : RDM on both inputs can be filtered to prevent unexpected behavior of DMX equipment.
The timing of the DMX-outputs can be adapted from 20Hz (slow) to 40Hz (fast) for increased compatibility while connecting “slow” DMX-devices to “fast” DMX-controllers.
Output behavior can be selected when suddenly both DMX-inputs fail:
- No DMX : no DMX signal on the outputs.
- HOLD : keep the last DMX values on the outputs.
- ZERO : set the DMX values on all outputs to zero.
Easy setup via graphic OLED display.

Produkter

Kategorier

Merker

Merkenavn

Artikler

Tilbehør

Alternativer

Artikler

Kundesenter

Kontakt Oss

Om oss

Bli kunde

Artikler

Event

Briteq DMS-285 RDM Merge/Splitt/Boost

2 in / 8 out, 5pin XLR,

📨 NYHETSBREV