Transportlengde: 174cm
Maks høyde: 730cm
Min høyde: 168cm
Egenvekt: 10Kg
Fotavtrykk base: 110cm
maks belastning: 10Kg
Aluminum stand with 5 risers and 6 sections.
Dia. 50mm, 45mm, 40mm, 35mm, 30mm, 25mm
Leg dia. 30mm
with 3 leveling leg
The perfect tool for real estate, event, landscape and school
photographers. Made from aluminium, the high view is
light enough to be carried on location by one person but
still strong enough to support up to 10kg. It is equipped
with a 3/8”-16 thread mounting plate on in top, so that you
can mount a tripod ball head to it. A steel tether is also
attached to the stand for an extra level of security while
your camera is high in the air. Eyelets in the top plate can
also be utilised to tether the top of the stand to the ground
using guy wires (these are not included).
The 229 High View features 5 risers and 6 column sections
allowing you to mount your camera, or lighting accessory,
anywhere between 1.9 and 7.3 meters. For an extra level of
stability, the centre column can be lowered independently
of the legs and hardware. This allows for a fourth point of
contact with the ground with minimal effort. Each leg also
has its own adjustment built in to ensure stable set up on
un-even ground.
Note: Maxmium loading weight is rated at 10kg, however, 1 kg maximum
payload at 6 degree inclination while the stand is full extended to 7.3 m (24’).
NB! Kupo samsvarserklærer og CE-merker ikke sine produkter, da de ikke er tiltenkt som løfteredskap etter maskinforskriften.