NB! STRØMKABEL LEVERES UTEN STØPSEL. SE TILBEHØR FOR ALTERNATIVER
CHROMAPIX is a LED matrix module capable of projecting volumetric graphics, simulating a 3D effect. The cutting-edge optic design combines RGBW/FullColor LED source with special optic reflectors which allow a unique reproduction of 6° tight light beams. The generated effect is a wall of LEDs, performing a long through projection of sharp beams in the air which are brighter than conventional LED screens. CHROMAPIX is a matrix composed by 5x5 high efficiency OSRAM LEDs with dimensions of 50x50 cm and on-board modular rigging system to build wall or matrix in every sizes. The innovative electric design and the quality of components and drivers applied offer a stepless and linear dimmer, useful to perform same dimming curve of halogen fixtures, allowing its fitness for theatrical application or wherever is required high performance dimming capabilities. CHROMPIX is an ideal tool for rental companies: superslim design, lightweight, user friendly, power supply and control electronics are on board and it doesn't need any external driver. The user interface comes through a graphic LCD display for user settings, diagnostic and addressing through both supported DMX and Art-Net protocols.
Light source and optics
25 (5x5) x 10W OSRAM RGBW/FullColor
Pixel pitch: 100mm
Beam angle: 6°
Field Angle: 15°
Lux @ 5m: 9434
LEDs average life span: >50'000h
Electronics and features
LCD Display control panel
Several DMX selectable configurations (3, 4, 6, 10, 100, 105 channels) for pixel2pixel or basic controlling:
3 channels: HSV
3 channels: HSI
4 channels: RGBW
6 channels: Dimmer, RGBW, strobe
10 channels: Dimmer, RGBW, strobe, macro, auto, speed, dimmer curve
100 channels: RGBW (x25 pixels)
105 channels: RGBW (x25 pixels), auto, speed, dimmer, strobe, dimmer mode
Both DMX and Art-Net control protocol supported
Auto mode: built-in programs with execution speed adjustment
Master/Slave mode: for synchronized operation of more units linked in a chain
Linear and “stepless” transition between DMX values
Flicker free operations (400Hz)
Structure and Power supply
Sturdy die-cast aluminum
Internal Protection: IP20
Cooling: forced ventilation with variable-speed low-noise fans, no heat generation
Bracket for truss rigging and hardware for connection of more units
Vertical rig up to 16 units
Power unit: 100-240V 50/60Hz
IN/OUT power wiring and signal through connections XLR3p/Powercon
Average power consumption: 315W (power output up to 6 fixtures)
Weight: 12 kg
Dimensions (WxHxD): 500x500x115mm