NB! Strømforsyning ikke inkludert. Se tilbehør for kompatibel vare
This relay hub consists of 2 high current (16A) relays with isolated sets of voltage free contacts that close on operation. The relay hub can be used in three ways:
1. Direct connection via Cat5/6 UTP cable to the A 6500 wallplate, which is programmed to control relay activation.
2. As an expansion to the A 6505 hub, increasing the total number of relay contacts from 3 to 5. In this configuration, one of the serial outputs of the A 6505 would be used to control the A 6515. These hubs should be located as close together as possible.
3. As a standalone serial controlled relay hub for use with any third party system utilising RS232/485.
Requires 24V DC input. Will provide power to A 6500 wallplate if connected.
Size: 50W x 131W x 46H inc flanges.