ISO Selector
The simplest ideas are usually the best! The new ISO Selector is a stereo Output signal switcher for the extremely popular Audibox range.
A front panel push switch silently switches a pair of female XLR inputs to either of A or B pairs of XLR male output connectors.
ARX ‘SoftSwitch’ technology achieves this with no loud transients or bangs through the audio system when switching.
Typical applications include switching between loudspeaker speaker systems, or between monitor speakers, equipment testing, and lots more.
Note - Connectors are inserted from the top of the unit. Please allow adequate space above the ISO Selector to allow for the connectors to be removed and / or replaced
Frequency Response DC to Daylight ± 0.0dB
Power Requirements None, passive unit.
Input Connectors 2 x Left and Right Female XLR, Wired Pin 1 Audio Ground, Pin 2 + Hot, Pin 3 – Cold.
Output Connectors 2 x A and B Male XLR, Wired Pin 1 Audio Ground, Pin 2 + Hot, Pin 3 – Cold.
Chassis is grounded and earthed via Pin 1 Ch A input Female XLR Connector
Construction All-steel chassis, textured blue polyurethane paint, epoxy printining, fibreglass PCB