PROLIGHTS RUBYFCX beam

50W, RGB beam, 2°

Varenr: RUBYFCX-ML
17 345,-eks. mva
Logg inn for å se dine nettopriser.
Ikke kunde? Søk om forhandlerstatus.
Bestillingsvare
På lager hos leverandør, forventet leveringstid er ca. 19 dager
BeskrivelseTilbehørAlternativerLenker & dokumenter
Beskrivelse

The Ruby FCX is a LED replacement for a discharge beam light. Maintaining the bright, tight,  2° beam and adding full colour mixing through the high-efficiency RGB source.

Ruby FCX is packed with all the features you would expect from a beam effect moving the light - such as gobos, 8f circular and 6f linear prism, frost and infinite pan and tilt rotation.

Features:
50 W RGB LED source incredibly bright and colourful
Infinite pan & tilt rotation delivers new aerial effects
Control through DMX, Art-Net and Wireless DMX

LIGHT SOURCE
Source: 50W RGB LED
Lux: 141'929lx @3 m full
Lux: 51'094lx @5 m full
Source life expectancy: > 50.000 h


OPTICS
Beam angle: 2°
Lens diameter: 116mm
Lens type: high-quality glass lens optics
Focus: motorised


COLOUR SYSTEM
Colour mixing: RGB / FC
CTC: CTC control through dedicated DMX channel
White presets: 2.000 K - 8.000K
Colour wheel: virtual colour wheel with presets
Macros: several pre-build pixel macros with adjustable speed


DYNAMIC EFFECTS
Fixed gobos: 17 fixed gobos + open
Circular prism: 8f with bi-directional rotation, indexing
Linear prism: 6f with bi-directional rotation, indexing
Frost: frost unit to soften the beam edge


BODY
Pan angle: 540° / 630° with 360° continuous rotation
Tilt angle: 265° with 360° continuous rotation
Pan/Tilt resolution: bit 16 bit
Feedback: automatic repositioning after accidental movement
Body: sturdy die-cast aluminium body conceived for long-time durability
Body colour: black


CONTROL
Protocols: DMX512, RDM, Art-Net, W-DMX
DMX channels: 18 / 20 / 22 / 23channel
W-DMX: included, wireless solution receiver
RDM: RDM ready for fixture remote monitor and settings
Display: LCD high resolution colour display with autoflip
Firmware upgrade: yes, via USB - DMX interface (UPBOX2) not included
Hibernation: power safe mode when lost DMX
Master/Slave: for synchronized operation of more units linked in a chain


ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Strobe / shutter: 1 - 30 Hz, electronic
Battery backup: battery backup for user operation without connecting to the main power
Operating temperature: 0° ~ +45°
Flicker: flicker free operation


ELECTRICAL
Power supply: 100-240 V – 50/60 Hz
Power consumption (at 230 V): 122W
Power consumption (at 120 V): 124W


PHYSICAL
Cooling: forced air with low noise fan
Sospension and fixing: any position with quick-lock omega brackets
Signal connection: Amphenol XLR 5p IN/OUT connectors
Data connection: Art-Net RJ45 IN/OUT
Power connection: Seetronic powerCON IN/OUT connectors
IP rating: 20
Dimensions (WxHxD): 194x311x133mm
Weight: 12kg

Tilbehør
Alternativer
Lenker & dokumenter
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.