SBL LED Driver med Veggkontroller 24V, 200W CV, 4 kanaler

SBL LED Driver med Veggkontroller

24V, 200W CV, 4 kanaler

Varenr: 172173
3 212,-eks. mva
Logg inn for å se dine nettopriser.
Ikke kunde? Søk om forhandlerstatus.
19 på lager i Oslo
BeskrivelseLenker & dokumenter
Beskrivelse

SRP-1009-24-200CVF is an UL and ENEC approved 200W dimmable PWM RGB LED driver with 4 channels 24VDC constant voltage output and 100-277VAC universal input. Power factor of the driver can be over 0.9 and efficiency is higher than 90%. It enables smooth and deep dimming to 0.1% without flickering and buzzing noise. The PWM LED driver is designed with RF control interface and can be compatible with a variety of SR-1009 series RF remotes. While working with a WiFi-RF transmitter, this driver can be controlled via APP installed on IOS or Android mobile devices. The driver can control single color, tunable white, RGB/RGBW LED lighting. UL and ENEC certification ensures high safety performance of the driver to be used worldwide.

Key Features

  • Dimmable 24V PWM RGB LED Driver, Max. output power 200W
  • UL and ENEC certification
  • 100-277VAC universal input
  • 4 channels 24VDC constant voltage output
  • Class ? power supply, full isolated plastic case
  • Rubycon capacitors
  • Built-in two stage active PFC function
  • High power factor and efficiency, PF > 0.9, Efficiency > 90%
  • RF control interface and can be compatible with a variety of SR-1009 series RF remotes
  • Can be controlled via APP installed on IOS or Android mobile devices while working with a WiFi-RF transmitter
  • To control constant voltage single color, tunable white, RGB/RGBW LED lighting
  • Smooth and deep dimming to 0.1% without flickering, no buzzing noise
  • IP20 rating, suitable for indoor LED lighting applications
  • Radio frequency available: 869.5/434/916.5MHz

 

 

SR-2820 is a RGB touch controller which adopts ultra sensitive full touch glass touch panel with touch color wheel to offer accurate and fast color tone adjustment. The touch panel controller is designed with sleek appearance and user-friendly interface for easy operation. Each controller can control up to 4 zones synchronously or independently with endless receivers in each zone. Built-in 10 dynamic changing patterns are available with pause function when played. Each zone can save 4 scenes if you do not like the built-in ones. Independent dimming function of each R, G, B, W channel enables the RGB controller to create millions of colors.

Key Features

  • User-friendly interface, easy and simple operation
  • Operation return function
  • Control up to 4 zones, each zone can be set endless receivers, each receiver maximally be controlled by 8 different remotes
  • Set 4 scenes at each zone
  • Preset 10 changing modes, with pause function
  • Synchronization function of pattern changes ensure consistent change forever
  • Receivers can work with RF-WIFI converter after installing software on IOS and Android system
  • Enable to dim brightness of each R, G, B, W channel, in order to mix millions colors
  • Synchronization function of pattern changes ensure consistent change forever
  • To adjust brightness of each color independently that can achieve millions of changing colors
  • DC and AC input versions are both available
  • Italian/Australian, US in-wall size available as well
Lenker & dokumenter
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.