PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter PETZL GRILLON Anker-/støtteline Hvit/gul, 5 meter

PETZL GRILLON Anker-/støtteline

Hvit/gul, 5 meter

Varenr: 159378
Alt. varenr: L052AA03
1 786,-eks. mva
Logg inn for å se dine nettopriser.
Ikke kunde? Søk om forhandlerstatus.
Lengde
2m
2m
3m
3m
5m
5m
10m
10m
15m
15m
20m
20m
1 på lager i Oslo
BeskrivelseTilbehørAlternativerLenker & dokumenter
Beskrivelse

Adjustable lanyard for work positioning


The GRILLON adjustable lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Depending on the configuration, it can be used in single or double mode. GRILLON is available in seven lengths (2, 3, 4, 5, 10, 15 and 20 m), and also in black. It is certified to North American, European and Russian standards.

 

Description

Easy to use: the fine adjustment system allows length to be precisely adjusted for comfortable positioning at a work station
Can be used in two ways:
- double mode (on the harness side attachment points) when the user works with weight on his/her feet. This type of attachment ensures better load distribution on the belt. Length is adjusted by pressing on the pivoting cam
- single mode, on the harness ventral attachment point, when the anchor is located above the user, so that the load is comfortably distributed between the belt and leg loops. Length is adjusted by operating the handle, while holding the free end of the lanyard
Sewn terminations on both ends with plastic sheath to keep the connector in position and protect the rope from abrasion
Protective sheath protects the rope from abrasive contact and enhances rope glide. This protection can be removed for single mode use, to bring the user closer to the anchor
Available in seven lengths: 2, 3, 4, 5, 10, 15 and 20 m. Lanyard length is immediately identified by a color-coded label at the connector end
Available in two colors: white/yellow and black
Replacement ropes available


Specifications

Material(s): nylon, polyester, aluminum
Certification(s): ANSI Z359.3, CSA Z259.11, CE EN 358, CE EN 12841 type C, EAC

Tilbehør
Alternativer
Lenker & dokumenter
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.