PROLIGHTS ECLFR2KDY Fresnell

504W 5600K LED

Varenr: ECLFR2KDY-ML
Alt. varenr: ECLFR2KDY
29 759,-eks. mva
Logg inn for å se dine nettopriser.
Ikke kunde? Søk om forhandlerstatus.
Farge
Sort
Sort
Hvit
Hvit
Bestillingsvare, bestilles ved ordre. Ta kontakt for leveringstid.
På lager hos leverandør, forventet leveringstid er ca. 37 dager
BeskrivelseTilbehørAlternativerLenker & dokumenter
Beskrivelse

NB! STRØMKABEL LEVERES UTEN STØPSEL. SE TILBEHØR FOR ALTERNATIVER

ECLFR2K is the LED replacement for a standard tungsten 2K fresnel. Featuring the output characteristics of a traditional Fresnel but with beam control, functional barn doors and a power source that focuses on outstanding colour rendition. The ECLFR2K adds all the advantages of LED to the Fresnel.

FEATURES:
TU (3200K) and DY (5600K) versions available both with HD dimming
Fresnel lens with 15° to 45° zoom range
Silent operation for studio and stage use

LIGHT SOURCE
Source: 507W high-power white LED
CT: (TU) 3200 K - (DY) 5600K
CRI: (TU) 97 Ra - (DY) 95
R9: >90
Luminous flux: (TU) (50°) 25338 lm (17°) 22556lm @Full
Lux: (TU) - (17°) 28400 lux - (50°) 6150lux @3m full
Lux: (TU) - (17°) 10224 lux - (50°) 2214lux @5m full
Source life expectancy: >50.000 h
Other: TM30-15RF: (TU - 16°) 94/103 - (TU - 52°) 93/104 - TLCI: (TU - 16°) 94.8 - (TU - 52°) 94.4

OPTICS
Zoom: 15° - 45° manual
Lens diameter: 250mm
Lens type: Fresnel zoom lens
Other: Spigot, barn door and gel frame included
COLOUR SYSTEM
Colour mixing: warm white
Macros: several pre-build macros with adjustable speed

DYNAMIC EFFECTS
Static colour mode: selection of static dimmer
Manual colour mode: manual adjust of dimmer throught menu and knob
Auto mode: built-in programs with execution speed adjustment

BODY
Hardware on-board: filter frame, 8 doors barndoor, omega bracket spigot
Body: sturdy die-cast aluminium body conceived for long-time durability
Body colour: black
Other: Pan/Tilt infinite for pole operated version

CONTROL
Protocols: DMX512, RDM, Local knob
DMX channels: 1 / 2-1 / 2-2 / 3 / 5channel
RDM: RDM ready for fixture remote monitor and settings
Display: black OLED high resolution display
Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
Master/Slave: for synchronized operation of more units linked in a chain
Other: 16bit control of dimmer

ELECTRONICS
Dimmer: linear 0~100% electronic dimmer
Dimmer curves: different dimming curves available
Strobe / shutter: 1 - 30 Hz, electronic
Operating temperature: -10° ~ +45°
Flicker: flicker free frequency with adjustable PWM
Selectable PWM: 600~25K Hz

ELECTRICAL
Power consumption: 550W
Power supply: 100-240V – 50/60Hz
Power consumption (at 230V): 466W
Power consumption (at 120V): 469W
Output (at 230V): 4 units on a single power line
Output (at 120V): 2 units on a single power line
Power factor: pF 0.96 @ 230V - pF 0.99 @ 120V

PHYSICAL
Cooling: combination of heat pipe cooling system and low noise fan
Sospension and fixing: hanging bracket suitable for safe hanging and positioning
Signal connection: Amphenol XLR 5p IN/OUT connectors
Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
IP rating: 20
Dimensions (WxHxD): 421x537x455mm
Weight: 17.2kg

Tilbehør
Alternativer
Lenker & dokumenter
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.