PROLIGHTS PIXIEZOOMXB LED Par

280W RGB+warm white

Varenr: PIXIEZOOMXB-ML
17 196,-eks. mva
Logg inn for å se dine nettopriser.
Ikke kunde? Søk om forhandlerstatus.
Bestillingsvare
BeskrivelseTilbehørLenker & dokumenter
Beskrivelse

PIXIEZOOMXB is a super bright single-source IP rated LED PAR featuring a 6°- 45° linear zoom and a fully homogenised output. PIXIEZOOMXB is equipped with a proprietary 280W RGB + Warm White LED module which delivers a high-quality white reproduction with high CRI and TLCI parameters as well an extremely precise colour tuning. PIXIEZOOMXB is an ideal solution for any application where users want a superior light quality but without the view of multi-cell fixtures. Being IP rated and offering a wide zoom range, the PIXIEZOOMXB offers unprecedented flexibility and is a truly indispensable fixture for every rental house.

FEATURES:
280W proprietary RGB + warm white LED delivering high CRI, TLCI, TM30 values
6° to 45° linear zoom with superior evenness
IP65 (events) and WDMX onboard

LIGHT SOURCE
Source: 280W RGB + warm white
CT: 6500K
CRI: > 92
R9: > 94
Luminous flux: (6°) 3670 lm - (45°) 3795lm
Lux: (6°) 29900 lux - (45°) 1590lux @3m full
Lux: (6°) 10764 lux - (45°) 572lux @5m full
Source life expectancy: 70000
Other: TM-30-15RF/RG: 90/99 - TLCI: >85

OPTICS
Zoom: 6° - 45° motorised linear zoom
Field angle: 11° - 58°
Lens diameter: 125mm
Lens type: high-quality glass lens optics

COLOUR SYSTEM
Colour mixing: RGB+Warm White
CTC: CTC control through independent DMX channel
White presets: 2800 - 10000K
Colour wheel: virtual colour wheel with presets
Macros: several pre-build macros with adjustable speed

DYNAMIC EFFECTS
Manual colour mode: manual adjustment of colour
Auto mode: built-in programs with execution speed adjustment
BODY
Hardware on-board: on board mechanics for rigging to the ceiling
Body: sturdy die-cast aluminium body conceived for long-time durability
Body colour: black

CONTROL
Protocols: DMX512, RDM, W-DMX
DMX channels: 5 / 7 / 11channel
W-DMX: included, wireless solution receiver
RDM: RDM ready for fixture remote monitor and settings
Display: black OLED high resolution display
Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS
Dimmer: linear 0~100% electronic dimmer
Dimmer curves: different dimming curves available
Strobe / shutter: 1 - 30 Hz, electronic
Battery backup: battery backup for user operation without connecting to the main power
Operating temperature: -20° ~ +45°
Flicker: flicker free frequency with adjustable PWM
Selectable PWM: 600~25K Hz

ELECTRICAL
Power supply: 100-240V – 50/60Hz
Power consumption (at 230V): 271W
Power consumption (at 120V): 276W
Output (at 230V): 8 units on a single power line
Output (at 120V): 4 units on a single power line

PHYSICAL
Cooling: combination of heat pipe cooling system and low noise fan
Sospension and fixing: hanging bracket suitable for safe hanging and positioning
Signal connection: Seetronic XLR 5p IN/OUT connectors
Power connection: Seetronic powerCON waterproof IN/OUT connectors
IP rating: 65 for temporary outdoor application, not for fixed installation
Dimensions (WxHxD): 467x335x418mm
Weight: 12kg

Tilbehør
Lenker & dokumenter
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.