PROLIGHTS LUMIPIX12UQPRO LED Bar 12x8W RGBW/FC, section control PROLIGHTS LUMIPIX12UQPRO LED Bar 12x8W RGBW/FC, section control PROLIGHTS LUMIPIX12UQPRO LED Bar 12x8W RGBW/FC, section control PROLIGHTS LUMIPIX12UQPRO LED Bar 12x8W RGBW/FC, section control PROLIGHTS LUMIPIX12UQPRO LED Bar 12x8W RGBW/FC, section control

PROLIGHTS LUMIPIX12UQPRO LED Bar

12x8W RGBW/FC, section control

Varenr: LUMIPIX12UQPRO-ML
Alt. varenr: LUMIPIX12UQPRO
4 886,-eks. mva
Logg inn for å se dine nettopriser.
Ikke kunde? Søk om forhandlerstatus.
7 på lager i Oslo
På lager hos leverandør
BeskrivelseTilbehørAlternativerLenker & dokumenter
Beskrivelse

NB! STRØMKABEL LEVERES UTEN STØPSEL, SE TILBEHØR FOR ALTERNATIVER

LUMIPIX12UQPRO is a 1 m long linear colour changer equipped with 12 high-efficiency RGBW / FC LED (8 W each). The control system is customisable allowing section control and advanced possibilities in effect generation such as LED video or sound activated arrays.

Features:
12x8 W RGBW / FC high-efficiency LED
Pixel control: section control
Advanced on-board effects generation
USB port for USB WIFI transceiver (optional)
Flicker-free operations

LIGHT SOURCE
Source: 12x8W RGBW LEDs
Luminous flux: 2'241lm
Lux: 1'813lx @3 m full
Source life expectancy: > 50.000 h

OPTICS
Beam angle: 19°
Field angle: 36°
Lens diameter: 38mm
Additional optics: 45° (optional)

COLOUR SYSTEM
Colour mixing: RGBW / FC
CTC: CTC control through dedicated DMX channel
Colour wheel: virtual colour wheel with presets
Macros: several pre-build pixel macros with adjustable speed

DYNAMIC EFFECTS
Static colour mode: selection of static colour
Manual colour mode: manual adjustment of colour
Auto mode: built-in programs with execution speed adjustment
Sound mode: music activation through internal microphone and sensitivity control

BODY
Body: sturdy die-cast aluminium body conceived for long-time durability
Body colour: black

CONTROL
Protocols: DMX512
DMX channels: 4 / 7 / 9 / 12 / 17channel
Pixel control: 1 / 3 section control
W-DMX: optional, proprietary protocol compatible with WIFIBOX, WDBOX
Display: LED display user interface
Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
IR: infrared sensor controlled by remote
Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 different dimming curves available
Strobe / shutter: 1 - 28 Hz, electronic
Operating temperature: 0° ~ +45°
Flicker: flicker free operation

ELECTRICAL
Power supply: 100-240 V – 50/60 Hz
Power consumption (at 230 V): 73,6W
Power consumption (at 120 V): 71W
Output (at 230 V): 18 units on a single power line
Output (at 120 V): 7

PHYSICAL
Cooling: passive cooling and fan-free
Sospension and fixing: double hanging bracket suitable for safe hanging and for floor positioning
Data: USB port for USB WIFI transmitter (optional)
Signal connection: XLR 3p + 5p IN/OUT connectors
Power connection: Seetronic powerCON IN/OUT connectors
IP rating: 20
Dimensions (WxHxD): 1.000x56x168mm
Weight: 3,3kg

Tilbehør
Alternativer
Lenker & dokumenter
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.